How to Install A Pot Filler In An Existing Wall

So, let’s dive in!

Installing a pot filler in an existing wall is not a difficult task. However, a pot filler that stays upper the stoves, helps a lot. If you choose one for you, you don’t have to carry water from the sink to the stove. It also helps to pour every kind of pot. Boiling water, making tea, are easy with a pot filler. Single valve pot fillers are easy to install.

Now, if you want to install a pot filler faucet in your kitchen wall, you need to follow a few steps. In this guide, we’re going to discuss those steps.

So, let’s dive in!

Step 1: The first move is making a plan. You can find a lot of instruction videos on the internet, they may show you steps, but when you’re working on your own. You have to make a plan for yourself. Write your plan down if needed.

Step 2: Get your water line to the location you want to mount the faucet at. Get down and find out your water supply line. This is more of a plumbing process. So, if you’re afraid, get the help of an plumbing professional services. But if you choose to do it, then you have to use a hose or a pipe.

Pot Filler In An Existing Wall1

Bring the waterline up to the wall. Drill a hole where your pot filler is going to come out. You can choose whether you’re setting it in the middle of the stove or on the side. It’s up to you.

READ  New Ways:Affordable Deck Installation and Replacement Services Home Improvement

Step 3: Attach a threaded pipe to your water line hose or pipe. The maximum size of this pipe is 2 and a half-inch. When attaching use sealant paste to make sure there isn’t any leak.

Step 4: Install the mounting plate. Take the mounting plate and mark where you need to put in the screws. Drill holes according to the measurement of the screws.

After that, place the mounting plate along with the mounting gasket and tighten the screws.

Step 5: Now, set up the pot filler. Attach it with the threaded pipe that you installed. To keep your thread leak-free and durable, use sealant paste. Don’t over tighten the pot filler. This will damage the thread. Use your common sense and make sure where the end of the thread is.

Don’t put extra pressure. It’ll damage the thread and this will cause leaks and drips.

Step 6: Build your drywall and make everything look good when you’re totally done with everything. Enjoy your pot filler.

Pot Filler In An Existing Wall

Cautions:

  1. Shut off the water line before start working.
  2. If you’re plumbing, then don’t forget to shut off the electric line.
  3. Use one valve pot filler if you’re installing it yourself.
  4. Make sure the water supply line is filtered as you’ll be using it for cooking.
  5. When tightening threads, don’t put extra pressure.
  6. Keep it high if you use larger pots for cooking.

Conclusion

So, this how you can install a pot filler in an existing wall. In this short guide, we tried to share the steps of installing a wall mounting faucet. We covered the main things of the faucet installation. If you have any questions or queries, feel free to leave a comment.